How to Make a FORTNITE SCAR in Adobe Illustrator!

(magical jingle) Hey, everybody. Welcome into this Adobe Illustrator tutorial. Brought to you, as always, by Today, we’re going to take a look at creating Fortnite Scar. Is that in focus? Should be in focus somewhere around there. I’m not really a big Fortnite player, but I’ve heard that this is a rather desirable weapon in the game; and I thought, you know what? Let’s try sketching one of these bad boys out, and then take the sketch into Illustrator, and make this a pretty cool, little piece of vector artwork. Now, you can download my sketch. It’ll be the sketch that we’re actually going to be using here in the tutorial. This one’s got some shading and stuff on it. You can download that using the link down in the description. And speaking of links in the description, I want to mention that this video today is brought to us and sponsored by our good friends over at If you’re ever thinking of getting a new website, you’ve got to check out Squarespace. They support this channel by sponsoring videos like this one. So, if you’re ever thinking of getting a domain, website, online store, support our friends and make it with Squarespace. There’s another link down there in the description that you can use to go and sign up for a free trial, no credit card required, and then use the code ‘tutvid’ for 10% off your website when you decide to launch. So, let’s jump into Adobe Illustrator and make this little Fortnite Scar. We’re going to rip through it pretty quick here. So, hang tight. Use that pause button if you need it ; and let’s get going. Okay, here we are in Adobe Illustrator. In this tutorial, I’m going to speed through some of the stuff a little bit faster than normal, just because it took about an hour and forty-five minutes to draw this out, and there’s a lot of repetitive stuff. So, we’ll try to explain it and get on with it. So here, what I’m doing is, I’m going to go ahead and open up create a new document. I’m going with the document that’s 2560×1440. It’s just a size I like to work with, and then I’m going to go ahead and drag my sketch into Illustrator. Now, you can download this sketch. There’s a link down in the bio of this video. You can go and grab this sketch, and play right along with me here. Just move it around, resize it a little bit in Illustrator. So, here, as I create a new layer I’m going to name it whatever I want. And I’m actually going to drag it beneath that sketch. And then I’m going to set the sketch layer to the blend mode multiply right there in the transparency panel. That’s going to allow the sketch to superimpose itself above the colored shapes that I’m drawing. And then I’m going to grab the pen tool, I’m going to use any old colored fill, and I’m going to begin drawing the shapes. And I’m going to begin with the shapes that I think are closest to me as I’m looking at the side of this Fortnite Scar. I’m going to create those shapes first, and then work with layer stacking and arrangement to make everything look as good as possible. Now, all I’m concerned about here are laying down very rough, base shapes. I’m going to make sure smart guides is turned on, because that’s going to help all my shapes line up a little bit better; allow me to draw a little bit more accurately. But I’m concerned with creating very rudimentary – tons of sharp lines, maybe a little curve here or there. But just these very rough, overlapping shapes. Now, speaking of overlapping shapes, I’m going to go to Objects>Arrange and I’m going to be using this send backward. The hotkey for it is CMD/CTRL and the left bracket key. It’s going to be super useful for the process of creating these shapes. And then it’s a process of going through and creating a bunch of very, very rudimentary shapes. We can always come in and adjust and tweak our paths later. We just want to get our initial shapes laid down. And again, liberally use that CMD/CTRL and the left bracket key to send layers to the back and you know, give yourself a perfect edge. That’s why I work with the front-most shape that I see first. So, I’ll just move through here and continue drawing and creating shapes. And when it comes to creating the little rail that runs across the top of the Scar, I’m just going to create a series of little squares. All the same size. And I’m just ALT/OPT dragging out copies of the squares, and just lining them up a little bit with my sketch. Again, the sketch it more a suggestion than anything. As long as we’re hanging around the sketch, we’re probably going to get a pretty good result. But then I’m going to select all these little squares, and I’m going to use my align panel. And I’m just going to make sure I space and distribute the horizontal space evenly, just to line them up nicely, and it’ll make it look a little bit more perfectly. And then just go in and create a lot of these smaller shapes near the front sight of the weapon. Create the barrel and the flash suppressor, and everything that has to do with the front of the weapon. The rear sight, we’ll make sure we get that taken care of, and just build out these shapes one by one. And again, the whole time as I’m drawing, I’m just drawing very blocky, sharp cornered, straight edged shapes, for the most part. Here on the butt-stock, I’m rounding it off a very little bit. With the pen tool – I’m drawing these shapes with the pen tool, that is. And then I’m going ahead and making sure I’m using that arrangement to push stuff behind, behind, behind. And you can see, I’m filling the shapes with all sorts of random colors – a lot of pinks and blues. That’s just to give me some differentiation, so I can quickly see, alright, this is on top, or this is underneath. We’ll worry about all the colorization later on. Now, something like the handle, I’m going to create that and I’m probably going to work some of the curves right into it. You can see, I’m not going with a straight blocky shape. We’ll begin giving that some curves, and then interestingly here for the magazine what I’m going to do, is I’m going to drag out an ellipse that follows the curvature of the magazine sticking out of the gun; and then I’m going to use my scissors tool and just snip the path, and save only the little piece that I want. So, I’ll select the bulk of the rest of that path, just delete it. And I’ve got this little path and then I’ll apply a nice, fat, I don’t know, 100-150 point stroke. It was something like that. And then we have a nice, little shape. And you can adjust, and rotate, position it. And one thing I do do to the shape here, is I go Object>Expand and choose to expand strokes to fills. And this then gives me just a standard shape and I can go ahead and arrange just as I did before with the rest of the shapes. Push it behind the bottom of the weapon a little bit. And then I’ll just add the little cap to the bottom of the magazine, as well. You can see, we’re really doing a lot here. Now, we can zoom in and begin refining the shapes. I’m cutting out little pieces of shapes as needed. And you can see, as I cut things out, you probably are going to need to push things back in the stack. Again, using CMD/CTRL and the square bracket key, no problem there. We can just do that. And I’m cutting these shapes out by drawing a shape on top of what I have there. And then using the minus front option in the path finder panel. Very, very useful. You can Window>Path Finder, open up the path finder panel and just begin knocking holes in the shapes you’re creating. And you can see, we can go over here – the trigger, we can go in and draw the trigger shape and the little hole that goes through the lower part of the weapon for that. And then the little slot there on the rear sight, we’ll use a little rounded rectangle. And really, once you have the base of shapes, you can see we have a very rough outline of the weapon. It looks pretty good when the sketch is shut off. But it could look so much better, right? So this is where we begin the process of rounding some corners, beginning to add some flow and organic feel to our object. And I’m going to begin by using the direct selection tool. That’s the white arrow. Because you can select individual corners of a shape and then you’ll see the little dot appear next to the corner. You can click that round just that one individual corner. So, I’m going to round off a bunch of the pieces of the shape, beginning there with the trigger, as you can see. And you can also select shapes wholesale. And you can go Effect>Stylize and choose to round corners that way. I’m giving the bulk of these just big shapes that have a bunch of straight edges and sharp corners. I’m just going Effect>Stylize>Rounded Corners, and giving it a 5 pixeled rounded corner. I can always go in later, and tweak and adjust. But for now, I’m liking what I’ve got. So, I’ll go through very, very quickly and round off the corners of a lot of these shapes; and anything that needs to be done by hand, you can always grab with that direct selection tool. Select that corner, and make the round exactly as you want it to be. So, here with the lower receiver of the weapon, I can select all of the points on the bottom and round them maybe a little bit more. And then here, to the sides of the magazine, I can round those a little bit more. And you just have a lot of options, so here around the handle of the weapon, I can also round all of those corners and points just to subdue that a little bit. And just go over generally and round things just to make it look a little bit better. Again, it’s all personal taste, what you think is going to look good and feel right, and just go ahead and do that. It’s a little time consuming, but once you get it done, you’ll be really happy with it. Alrighty, let’s take a quick break from all of that drawing shapes, and colors, and everything we’re throwing around in there; and give Squarespace a quick plug for sponsoring this video. They’ve got a system that allows you to easily build the most beautiful, and easy-to-use websites out there. You’ll have your new website up and running in no time flat. So, if you want a portfolio, a blog, or a full e-commerce store, you can do it quickly; you can do it easily with Squarespace. I built my own personal photography site on Squarespace years ago, I still have it. I’ve had it for years. I love it. It’s fast, it’s mobile friendly, it’s so easy to update and change. No coding, none of that stuff – a lot of things you don’t think about they make very, very easy, I’ll put it to you that way, when it comes to updating your website. So, check out, or click the link down in the bio of this video, for your free trial. Again, no credit card required, and if you decide to launch your website, just use the code ‘tutvid’ to save 10% on your first website. Check them out. Consider showing them a little love for supporting this channel and helping me make these videos; and Squarespace, thank you for supporting this video, as well. Guys, let’s jump back into this video and continue building our little Scar. So, this part is important. Once we have the base of our object, our icon, whatever it is we’re drawing, laid down, I want to select all the shapes and group them by going Object>Group, and then I’m going to duplicate the group by going Edit>Copy, and then Edit>Paste in Front, and what I can do then is with that group selected, I can get rid of the fill using the color swatches in the bottom of the toolbox, and give it a nice, thick stroke. So, I’m going with a 5 point black stroke, and I’m hitting the stroke option in the properties panel. And I’m making sure that all the corners and caps are rounded. So, once we’ve done that, we’ll actually select all these strokes we just created and then go Object>Ungroup. I like to lock up my underlying layer. So all those colored layers in that group, just lock that whole group up so we don’t mess around with it. And all of these strokes should now be individual shapes on their own little shape layers. And we can begin selecting these shapes one at a time, and again, with smart guides turned on, it makes this really easy. Use the scissors tool and begin snipping away all the bits of path that you don’t want. And once you make the cuts in the path, you can just select that piece of path and delete it right away. It’s really a piece of cake, and this is just a little time consuming. You want to go over your sketch and nip away anything that you don’t like. There are a lot of different ways to do this in Illustrator, this is just a tried and true, simple method that I like to use sometimes. But there’s all kinds of ways you can do this. In this case, I’m just using the scissors tool. And once we’ve wrapped that up, I’m looking here at the butt-stock, I think I want to add a little bit of that gripped texture. I can see in my sketch. So, I’m going to create a series of shapes. Just duplicate them along the backside. Group them up, and then what I’ll do is I’ll select those shapes, and just that one little piece of the butt-stock. And I’ll use the minus front there in my path finder panel, and just punch that hole in there. And make sure I create a stroke to go along with it. Just like that. And I think that looks pretty good. We’ve got that texture now added to the pad of the butt-stock of our rifle. At this point, I can select all of those strokes that we just created. Group them up into their own layer group and lock that up, just set it aside. So, we have the color block set aside and all the strokes associated with them set aside, as well. And now begins the process of using shape tools. I’ll use the ellipse and lay down some little knobs and screws and things that hold this weapon together. I’ll use the pen tool to draw some little texturized scratches. Use the rounded rectangle tool to add this little module here next to the trigger, and I’ll also add a little knob for the fire safe knob next to the trigger, as well. So, we’ll build that out. Using a couple of rounded rectangles, very thin, I can create the little holes up here that are probably for air flow and cooling things down here for us. So, we’ll add those. That’s kind of a cool element of this weapon in Fortnite. So, I’ll make sure I throw those shapes in there, angle them a little bit. Whatever it takes to make it look right. And I’ll add the slide and ejection compartment here, and this other little doodad here on the side of the weapon, as well. Again, you can use the rounded rectangle, or you can use the rectangle and round the corners, and you can round individual corners more than others, again, by using that direct selection tool. Very, very useful and convenient. And again, it’s just a matter of using your drawing tools. The pen tool, you know, different shape tools to go in and create some of these textures with the little scratch marks, I was creating a simple path, and then using the stroke width tool to widen one side of the stroke and make the other side really narrow to give me these very cat-like scratch marks. It’s a really easy, really cool way to create that kind of effect. And then, I want to create a much thicker stroke that runs along the side of the weapon here. And this is going to differentiate and set apart the top part of this Fortnite Scar from the bottom part. Almost create the illusion of a shadow. So, I’ll create that and I pinch one end of the stroke with the stroke width tool and just lined it up in here, just to give a nice, thick stroke. Maybe 8 or 10 points in width is what I went with. Just to help differentiate here and set off the different parts of this Scar; and then just keep continuing, going through, adding texture. These are scratch-like textures I’m adding at this point, and they’re to add some of that scratchy texture, but also to add a shadow-like element, I’ll put it to you that way. And I’ll just build this stuff in. Just put it, honestly, wherever it feels right. I was following what I had in the sketch loosely. But not at all exactly. Just adding lines and strokes where I thought it was applicable. After that, I created a new path that just went with the flow of the magazine. Widened the path and expanded the stroke to a fill like we did before with the magazine, and then just colorize these strokes just to give myself an offset of the pressed metal that runs down the sides of these magazines. And again, one side note here, you’re going to want to make sure you use your arrangement hotkey to push that into place, so it sits on top of the magazine, but beneath the Scar itself. And then I also added a stroke to these and just trimmed the stroke. Just like we did before, with the scissors. Again, it takes a little bit of time, but you’ll get used to it. And then what we move on and work on, is the grip on the handle. So, I just drew a simple stroke around the handle and then, use the pen tool to draw a series of crosshatch lines; and duplicated those crosshatch lines and rotated him around. And then I selected all of those lines, and merged them together using the path finder panel, and then I duplicated the underlying oval that we had just created and moved it forward. And I used the crop feature functionality, after selecting that oval and the crosshatch pattern that I created, and use the crop path finder there in the path finder panel, to just cut it out and leave the bit of crosshatch that’s right there to form the grip on the handle. And after we’ve done that, we’ve created a lot of the deep texture-y stuff on the Scar, and it’s time to start creating some highlights and shadows, and I did this just by working a nice, thick, white stroke and the pen tool and this is adding all the highlight-y stuff. And what I did, is I just worked with whatever stroke width looks good to you – and then just set it to the blend mode of soft light using the transparency panel. It’s a really, really effective way. And the nice thing about this is it’s going to work with all sorts of different colors. So when we colorize this Scar at the end, all of our highlights and shadows will pass right through, and it’s going to look great. So, again, I’m just going through and adding highlights wherever it feels right. Wherever I think there’s going to be a ridge in the metal, and I think it would catch some light, if it was, let’s say, lit from straight above. I’ll go ahead and add a little highlight there, until I’m happy with the way all the highlights look. I built out some shapes on the top of the butt-stock, and I’m happy with that. And it’s time to move on to shadows; and you do the same exact thing with shadows. Just you’re going to be drawing shapes that are filled with black, and set that to soft light, instead of shapes that are filled with white. And go through, and you’re going to have some really nice shadowing and highlighting here on this Scar. Now, when it comes to the safe and fire toggle switch, I’m just going to fill that. I don’t want that to be a stroke. I want that to look and appear like a solid toggle switch that can be used. And I’m being picky right here at this point in the video, and going through and just looking at the barrel and making all of it one color. Just setting things apart, and then what I’m going to do is duplicate the whole weapon up, and you can see that because of the way we created those highlights, if this would appear over a darker background, you’re going to get all of that white that appears across the rail on the top of the Scar. That’s problematic. So, I’m going to zoom back in and I’m going to open up one of these groups. I’m going to ungroup; because I grouped all the highlights and shadows together. So I’m going to ungroup the highlights and shadows. I’m going to select that highlight, that stroke that runs along the top, and I’m going to go in painstakingly with the scissor tool, and cut and snip the highlight so it just drops on the very top of each one of those little bits of the rail. And after that, I can select all of these groups and my layer groups are the colored blocks on the bottom, then the outline we created, then a layer group of all those textures and everything that we applied, and then a layer group of all the highlights and shadows. I’ll duplicate that up, and keep a copy down here on my artboard. And I’m going to drag in a copy of the Fortnite Scar, and we’ll sample a couple colors from this. Now, the really important thing here, is not to go too crazy with the colorization process. Keep it simple. Five or six colors is probably fine. You don’t need to sample every single little area of the Scar, that’s just going to start to make things look muddied and complicated; and we really don’t want that. So, what I’m doing is establishing one or two beige colors on the Scar, and then resampling that beige across other areas. And then I’ll select some of the areas I think should be more of a dark gray, and try to sample a pretty dark gray, but not too dark, for the handle on the rail on the top. The barrel, I definitely want to be the darkest part of the weapon. So, once – you know, again, go through and make it look the way you want it to look. And really, the last thing I want to do here is just select that layer group that contains all of the blocks of color and everything. Copy it, by going Edit>Copy and then Edit>Paste in Front, and I want to just set the fill of all these shapes to some random color. I’m going with this salmon, pinky color, and then I’m going to use the merge capabilities of my path finder panel to merge all of these shapes into one giant shape which equals the outline of this Scar. And then I’m going to get rid of the fill, swap the fill and the stroke, and you can see here, I’ve got the stroke. And I’m going to give it a nice, thick probably 10 point, or so, stroke, and again, I’m going to make sure that I round the corners and round any caps, things like that. And I’m going to set the color of the stroke to black, not that weird, funky salmon color; and maybe I’ll even increase the size of the stroke up to 15 or something like that. It just gives it a nice popart, really heavy inked outline border to just really complete the effect of this Scar. This Fortnite Scar that we have just created here in Adobe Illustrator. Indeed, indeed, that is it. Now, I’ve got to say, if you got this far. If you completed this whole thing – well, now it doesn’t just look like the sketch, it’s got all the colors and everything in it that we like so much – I would love it if you would upload it to Instagram, and tag me in your Instagram post. My Instagram is @tutvid, if you tag me in the image it shows up in my tagged images and I can check it out, because this takes some time to do, and I would love to see how you customized yours and drew yours and maybe the colors you used. All kinds of cool stuff that can be done. That would be really, really cool to see. I try to go and like and comment on pretty much everything that gets tagged to me on Instagram. As long as it’s relevant design stuff, you know what I’m saying. But ladies and gentlemen, for creating a nice, little Scar from a sketch in Adobe Illustrator using some shape tools, and strokes, and really some colors, all simple drawing techniques… that’s it! Get it? Got it? Good! Nathaniel Dodson,, I’ll catch you in the next one.

Comments 48

    🔥 ↓ VIDEO GUIDE ↓ 🔥
    00:00 Intro, examples, sponsor shoutout
    01:13 Getting started
    01:33 Dragging in the sketch
    02:05 Start drawing shapes
    03:21 Repeating shapes for the rail
    04:37 Drawing the handle & magazine
    05:31 Refining the shapes and cutting out pieces
    06:22 Basic and advanced corner rounding
    07:49 Sponsor shoutout (Squarespace)
    08:52 Creating the stroke outlines
    10:15 Adding grip to buttstock
    10:55 Adding scratches and textures
    13:44 Creating handle grip texture
    14:26 Creating all the highlights and shadows
    16:39 Adding colors to the artwork
    17:24 Creating a bold pop art border stroke

  • Come on !
    Is it really necessary to bring out fortnite everywhere?
    Good tut tho!
    Keep up the good work

  • time to unfollow

  • Woah woah woah, guns!? No. Omg dude you’re gonna get banned. This is so bad. How could you do this!? The kids!! Oh GOD, NO! GUNS!!??!? WHY!?!?? NOOOOOO!

  • Very experienced designer here and I have to say, I love watching your videos. I always learn a thing or two, which I miss in my career due to being a one man design team within my company. Thank you and keep up the great tutorials!

  • Excellent work.
    So nicely teaching.

  • Sir please make video on hyper lapse, how to do it using after effects and premier pro

  • Amazing…

  • Toooooo fast

  • I love Nat and fornite. I hope after drawing follow this tutorial I will find more scar in game.

  • Bad idea. Even though it's just a game. For sure not a reason to unsubscribe like some may suggest, but even if I were into Illustrator I wouldn't consider watching this episode. Hoping for the next one…

  • Why

  • Thank you tutvid.. ♥️

  • Hey man, look I really love your videos and there super helpful I'm doing my masters in graphic design. I really like watching your videos and learning, this has really helped me out with a lot of technical skills particularly in Illustrator as I mainly came from a photomanipulation background. I'm saying all this cos I don't want you to think that is, not a fan or that I'm just hear to criticise you for no reason. You probably more than any of us commenters know whats best for your channel and like while there is nothing fundamentally wrong with this video it just feels kinda sell out-ish. and while the content of the video is still valid and interesting, titling it something like that just feels like a cheap tactic to drag in viewers. however, I get that this is your business and you have to make money and fortnight is hot right now so I guess that it comes down to a bit of a balancing act. Still really enjoyed the content of the video tho so I guess that if you see overall positive results from this its worth it.

  • Hey I like your tutorials man. I was just wondering if you'll be able to do tutorials for Adobe Animate CC?

  • Thought this one was Dope!!!

  • very nice

  • nice 🙂 I had thought that the illustrator is very difficult/heavy but i had learned much. (sorry for my very bad english i am from Germany)

  • Hating on Fortnite is the new hating on NIckleback it feels like. Wonderful tutorial as usual!

  • Wooow awesome. This is a way to high level for me but although I like to watch your videos because it's so impressive to see the abilities of Illustrator.
    Thx for your great work man!!

  • Got Complete concept of illustration.

  • it looks great!

  • Love the video as always! great tips, and as usual you went at a good pace. not too fast, not too slow.
    One thing i do want to say (and i suppose its just my opinion), [squarespace rant incoming]

    squarespace is was a nightmare to work with… its OK at first, but nothing scales correctly or in groups to mobile. I had to use code to override the scaling problem, but it took ALOT of code and i was often forced to override their settings by using their class names (which are only sometimes view able in 'inspect element'.) They also force you to use their templates, and if you want something different(like navigation placement), you have to find a new template entirely, and your likely have to reformat the styles of your entire site, or rebuild completely I just wanted to point this out because Squarespace was a massive headache and ate up a ton of my time (the store checkout also failed during an event i hosted[and i had to remove pages and formatting to get things working again], but i digress).
    I haven't tried wix, but im about to start up with Bluehost which i have heard good things about. I dont know who i would promote as web-hosts in the place of squarespace to be completely honest…

    but ultimately, Its your choice to promote who you want.

  • Golden Scar <3 <3

  • Really enjoyed doing this.

  • Another exciting example 👏👏👍👍

  • You move a little too fast on this one. It’s hard to follow and do it at the same time

  • Simply go to google and type: fortbrtt2 for free unlimited vbucks


  • tooooo fast T_T
    thank you so much tutvid 🙂

  • Step 1:
    Search google for "fortnite schar png"
    Step 2:
    Step 3:
    Drag file into whatever

  • This channel not recommended for beginner.This is so hard.I am leave this channel

  • Thx for video

  • video is too slow and too easy : )

  • i love it

  • For those complaining about not liking Fortnite: its still a great illustrator tutorial regardless. So stop crying.

  • гляньте мои видео по иллюстратору

  • Video is perfect. I ve been in your channel before you post this video and I am grateful that you did. Illustration doesn't have to be with a specific subject but any subject. I m sure there a lot of people that have different interests from each other, but game designing staff is a top subject. Because someone doesn't interested in this doesn't mean that this vid is bad geez.

  • learning so much, thank you.

  • I don't like Fortnite tbh, but to be fair I did learned quite a new things in this tutorial.
    the final result is looking good tho.
    Keep up the great work!

  • First off all, thanks for this highly informative tutorial!

    Now, towards the very end, I was dealing with some very strange and inexplainable bugs working with the "soft light" function to make shadows. For most colors on my scar (but not dark purple), making the shape and outline black showed the exact same effect as when the color was white! I chose black from the color swatches here.

    And for some colors, like blue, I could not even spot the shadow effect at all.

    The solution, it turned out, was to not select black from the swatches but instead use the 000000 black code. Just in case someone reading this has been dealing with the same mysterious bug. 🙂

  • perfect job

  • Gunliet288.

  • love your thing man i would like to learn more from u buddy much love

  • You are very fast kindly slow down so that we beginners also understand and able to do it but it was a good tutorial.

Leave a Reply

Your email address will not be published. Required fields are marked *